We also had the problem of the absence of EULA (“Configuration cannot find the end user license agreement”). I used Rufus 1.3.4. In the advanced format options, you can change the BIOS ID. The standard BIOS ID has been set from Rufus to 0x81. I tried 0x82, which restarted the PC forever. Then I tried 0x80 and passed the EULA message and was able to format the partition and the installation files were copied to the partition. Unfortunately, after a reboot, I launched the error “Windows could not be started because the following file is missing or corrupted: system32hal.dll Please reinstall a copy of the file below.” I could solve this problem by reworking the boot.ini file on the hard disk of the target computer and replacing “multi (0) disk (0) rdisk (1) partition (1)” twice for “multi(0) disk (0)rdisk (0)partition (1)”. We also had the problem of the absence of EULA (“Configuration cannot find the end user license agreement”). If it can`t find one file, it`s likely it can`t find others. This is only one thing to give the error. I even searched in the ISO file and I can find the Eula file in txt, so I don`t know why it`s still said that I tried to install XP on a netbook with Linux with Rufus. It seems that Flashdisk is now a bootable drive and is trying to install xp on the netbook, but there is an error that says “Configuration cannot find the End User License Agreement” (EULA) and ends the configuration.
The most common problem is that your source XP does not contain the appropriate hard drive drivers for your system. If your BIOS is configured for SATA-AHCI mode, change it to Legacy IDE mode. If you cannot change the BIOS mode of AHCI/SATA, you should either get an XP CD/ISO with built-in mass storage drivers or use Easy2Boot with the package of mass storage drivers added. I set the hard drive to boot in front of the USB, and F12 uses to get a Start menu. Nevertheless, the Windows files have been copied to the USB drive. Before he started copying, it was said, “Examine an 80 GB drive” or something of that magnitude is the hard drive. The configuration therefore knows that the hard disk exists. The first partition is FAT32 8GB, active. The second partition is NTFS~65Gb, expands logically.
As I said, installing Windows from the optical drive works well (same partition scheme: Windows installs on 8GB FAT32). *: I know that despite the reader registration, it will work well, but my end user is not an experienced computer scientist and he confuses them after the last 20 years where they drift with C:. It is only for the protocol and without offending another method/tool and its respective authors that I would try the WinsetupFromUSBwithGUI approach which I believe is the most tested (successfully). 4) If Windows copied the configuration files and the installation starts earlier, there was previously hpt3xxx.sys missing file Error I extracted the file from i386Driver.cab to the i386 folder and bypassed hpt3xx.sys Error I tried to use two programs, but still failed until I found this forum. Also look here at superuser.com/a/623998/63915 full error message: “Configuration cannot find the End User License Agreement (EULA) I entered to continue the installation, and this error occurs.” End User License Agreement (EULA) configuration cannot be found….